環球標準網-CNS標準解決之道! | 首頁 | 登錄 | 註冊 | 聯繫我們 | English |

Chinese National Standards
中華民國國家標準
- Taiwan 台灣 -
 

"y " CNS 標準清單

| 黃麻毛氈 | 機械安全 | 燒結鐵基 | 電弧樁熔 | 室內家具 | 閥之標稱 | 金屬鍍層 | 蘆筍罐頭 | 鉚釘工具 | 鹽水噴霧 |

C-電機工程, 電子工程
CNS 15120:2019 - 英文版
太陽光電能源系統用之二次單電池與電池組-一般要求與試驗法
Secondary cells and batteries for photovoltaic energy systems (PVES) ? General requirements and methods of test - English Version
Z2-工業安全
CNS 16104:2019 - 英文版
化學防護服-防護服材料在加壓下之耐液體穿透性試驗
Clothing for protection against liquid chemicals ? Determination of the resistance of protective clothing materials to penetration by liquids under pressure - English Version
B-機械工程
CNS 7779-1:2019 - 英文版
工業用風機-在標準化實驗室條件下風機聲功率位準測定-第1 部:概觀
Industrial fans ? Determination of fan sound power levels under standardized laboratory conditions ? Part 1: General overview - English Version
K-化學工業
CNS 15089:2019 - 英文版
油漆、亮光漆及相似物揮發性溶劑及中間物酸度試驗法
Method of test for acidity in volatile solvents and chemical intermediates used in paint, varnish, lacquer, and related products - English Version
B-機械工程
CNS 15732:2019 - 英文版
工業用機器人-握持式夾爪之物件處理-詞彙及特性描述
Manipulating industrial robots ? Object handling with grasp-type grippers ? Vocabulary and presentation of characteristics - English Version
C-電機工程, 電子工程
CNS 13306-1-1:2019 - 英文版
射頻擾動和免疫力量測設備與量測方法-第1-1部:射頻擾動和免疫力量測設備-量測設備
Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-1: Radio disturbance and immunity measuring apparatus - Measuring apparatus - English Version
C-電機工程, 電子工程
CNS 13306-2-3:2019 - 英文版
射頻擾動和免疫力量測設備與量測方法-第2-3部:擾動和免疫力量測方法-輻射擾動量測
Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-3: Methods of measurement of disturbances and immunity - Radiated disturbance measurements - English Version
L-紡織工業
CNS 6383:2019 - 英文版
維尼龍混紡紗(棉紡式,漂染紗)
Vinylon Blended Yarns, Cotton System, Finished - English Version
K-化學工業
CNS 4986:2019 - 英文版
合成清潔劑之化學分析法
Methods of Chemical Analysis for Synthetic Detergents - English Version

已翻譯
C-電機工程, 電子工程
CNS 3199:2019 - 英文版
聚氯乙烯絕緣花線
Polyvinyl Chloride Insulated Copper Wire - English Version
C-電機工程, 電子工程
CNS 15711-1:2019 - 英文版
太陽光電模組性能試驗與能量定額-第1 部: 照射度與溫度性能量測及功率定額
Photovoltaic (PV) module performance testing and energy rating ? Part 1: Irradiance and temperature performance measurements and power rating - English Version
F-造船工程
CNS 6182:2019 - 英文版
船用鋼質風雨密門 (圓角型)
Ships' steel weathertight doors (Round corner type) - English Version
C-電機工程, 電子工程
CNS 10798:2019 - 英文版
冷凍冷藏展示櫃-分類、要求及試驗條件
Refrigerated display cabinets – Classification, requirements and test conditions - English Version
N-農業,食品
CNS 14759:2019 - 英文版
食用油脂檢驗法-脂肪酸甲酯之測定
Method of test for edible oils and fats - Determination of methyl esters of fatty acids - English Version
G-鐵金屬冶煉
CNS 10804:2019 - 英文版
烤漆熱浸鍍鋅鋼片及鋼捲
Prepainted hot-dip zinc-5 % aluminium alloy-coated steel sheet and coil - English Version
C-電機工程, 電子工程
CNS 13306-1-3:2019 - 英文版
射頻擾動和免疫力量測設備與量測方法-第1-3部:射頻擾動和免疫力量測設備-輔助設備-擾動功率
Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-3: Radio disturbance and immunity measuring apparatus - Ancillary equipment - Disturbance power - English Version
B-機械工程
CNS 15193-4:2019 - 英文版
機械安全-接近機械之永久性方法-第4部-固定梯
Safety of machinery - Permanent means of access to machinery - Part 4:Fixed ladders - English Version
S-日常用品
CNS 15341:2019 - 英文版
辦公室家具-辦公室用椅穩定性、強度及耐久性試驗法
Office furniture - Methods of test for stability, strength and durability of office work chairs - English Version
C-電機工程, 電子工程
CNS 14674-2:2019 - 英文版
電磁相容性(EMC)-一般性標準-第2部:工業環境之免疫力
Electromagnetic compatibility (EMC) - Generic standards - Part 2: Immunity industrial environments - English Version
C-電機工程, 電子工程
CNS 16109:2019 - 英文版
有機與染料敏化太陽能電池- 電流-電壓性能量測試驗法
Test method for current-voltage (I-V) performance measurement of organic photovoltaic (OPV) and dye-sensitized solar cell (DSSC) - English Version
D-機動車及航太工程
CNS 8574:2019 - 英文版
汽車用電器零件詞彙(雨刷系統)
Glossary of Terms Relating to Electric Equipment for Automobiles (Windshield Wiper System) - English Version
D-機動車及航太工程
CNS 8577:2019 - 英文版
汽車用電器零件詞彙(音響警告系統)
Glossary of Terms Relating to Electric Equipment for Automobiles (Sound Signalling Device System) - English Version
C-電機工程, 電子工程
CNS 14934-4:2019 - 英文版
電磁相容-限制值-第4部:額定電流大於16 A之設備於低電壓電源系統中諧波電流發射之限制值
Electromagnetic compatibility (EMC) - Limits - Part 4: Limitation of emission of harmonic current in low-voltage power supply systems for equipment with rated current greater than 16A - English Version
K-化學工業
CNS 15087:2019 - 英文版
變性燃料乙醇中乙醇含量測定法(氣相層析法)
Method of test for determination of ethanol content of denatured fuel ethanol by gas chromatography - English Version
C-電機工程, 電子工程
CNS 60245-8:2019 - 英文版
額定電壓450/750 V 以下橡膠絕緣電纜-第8部:高可撓性用途花線
Rubber insulated cables ? Rated voltages up to and including 450/750 V ? Part 8: Cords for applications requiring high flexibility - English Version
K-化學工業
CNS 3387:2019 - 英文版
液化石油氣之烴成分試驗法-氣相層析法
Method of test for the determination of hydrocarbon components in liquified petroleum gases (LPG) ? Gas chromatography - English Version
K-化學工業
CNS 15051:2019 - 英文版
油脂衍生物(脂肪酸甲酯)-總脂肪酸甲酯及次亞麻油酸甲酯含量測定法
Fat and oil derivatives - Fatty acid methyl esters (FAME) - Determination of ester and linolenic acid methyl ester contents - English Version
K-化學工業
CNS 15646-2:2019 - 英文版
硬質發泡塑膠-彎曲性能測定法-第2 部:彎曲強度與視彎曲彈性係數測定法
Rigid cellular plastics – Determination of flexural properties – Part 2: Detrmination of flexural strength and apparent flexural modulus of elasticity - English Version
C-電機工程, 電子工程
CNS 60669-2-5:2019 - 英文版
家用和類似用途固定式電氣裝置之開關-第2-5部:住宅及建築物電子系統(HBES)用開關及相關配件之個別要求
Switches for household and similar fixed electrical installations – Part 2-5: Particular requirements – Switches and related accessories for use in home and building electronic systems (HBES) - English Version
D-機動車及航太工程
CNS 10980-2:2019 - 英文版
電動車用鉛蓄電池-種類及標示
Lead-acid traction batteries-Dimensions of cells and terminals and marking of polarity - English Version

找到:7363條目   |  [首頁]-[上一頁]-[下一頁]-[尾頁]  | 去到: [69] [70] [71] [72] [73] [74] [75]

 

| 首頁 | 常見問題 | 登錄 | 註冊 | 聯繫我們 | English | ©  CNS-standards.org   2001-2025 版權所有
主管機關連結:
經濟部標準檢驗局
本網站非隸屬於經濟部標準檢驗局