環球標準網-CNS標準解決之道! | 首頁 | 登錄 | 註冊 | 聯繫我們 | English |

Chinese National Standards
中華民國國家標準
- Taiwan 台灣 -
 

"B " CNS 標準清單

X-資訊及通信
CNS 13838:2018 - 英文版
50/125 及 62.5/125 微米多模斜射率型光纜特性
Characteristics of 50/125 and 62.5/125 μm multimode graded index optical fibre cables - English Version
F-造船工程
CNS 10167:2018 - 英文版
船用小型岸電接線箱
Marine Shore Connection Boxes (Small Type) - English Version
B-機械工程
CNS 4534:2018 - 英文版
結件詞彙(螺釘、螺栓、螺樁)
Terms of fasteners for screws,bolts,studs - English Version
F-造船工程
CNS 11994:2018 - 英文版
船用電動機起動器及控制器之電纜固定方法
Cable Clamping Devices for Motor Starters and Controllers in Ships - English Version
T-衛生及醫療器材
CNS 14393-3:2018 - 英文版
醫療器材生物性評估-第三部分:基因毒性、致癌性與生殖毒性之試驗
Biological evaluation of medical devices – Part 3:Tests for genotoxicity, carcinogenicity and reproductive toxicity - English Version
X-資訊及通信
CNS 12798:2018 - 英文版
基本模態控制程序–補充事項
Basic Mode Control Procedures-Complements - English Version
C-電機工程, 電子工程
CNS 9158:2018 - 英文版
船用250V二心、三心EPR絕緣CP被覆金屬網鎧裝電纜(附各心線個別遮蔽)及250V二心、三心EPR絕緣CP被覆金屬網鎧裝PVC防蝕電纜(附各心線個別遮蔽)
250V Twin-Core,Three-Core EPR Insulated,CP Sheathed Metal Netting Covered Cable and 250V Twin-Core,Three-Core EPR Insulated Metal Netting Covered PVC Anti-Corrosion Cable for Marine Use - English Version
E-軌道工程
CNS 9994:2018 - 英文版
鐵路車輛軸簧及枕簧用防振橡膠
Rubber Vibration Isolators for Axle and Bolster Springs of Railway Rolling Stock - English Version
Z7-一般及其他
CNS 13151:2018 - 英文版
資訊與文獻-圖書館統計
Information and documentation ? International library statistics - English Version
L-紡織工業
CNS 16061:2018 - 英文版
紡織品及其產品之燃燒行為-詞彙
Burning behaviour of textile and textile products ? Vocabulary - English Version
Z6-物流及包裝
CNS 6867:2018 - 英文版
玻璃噴霧瓶內壓力之測定
Method of Test for Pressure in Glass Aerosol Bottles - English Version

已翻譯
F-造船工程
CNS 10435:2018 - 英文版
船舶吊貨用鋼滑車(附滾子軸承)
Steel Cargo Block with Roller Bearings for Marine Use - English Version
K-化學工業
CNS 10456:2018 - 英文版
乳化瀝青蒸發殘渣量試驗法
Method of test for residue by evaporation of emulsified bitumen - English Version
C-電機工程, 電子工程
CNS 15436:2018 - 英文版
安定器內藏式發光二極體燈泡(一般照明用)-安全性要求
Self-ballasted LED-lamps for general lighting services – Safety specifications - English Version
X-資訊及通信
CNS 13918:2018 - 英文版
位元速率低於原級速率之錯誤性能測量基本參數
Basic parameters for the measurement of error performance at bit rates below the primary rate - English Version
X-資訊及通信
CNS 13369-3:2018 - 英文版
事務機器–規格書應包含的最少資訊 第3部: 郵資蓋印機
Office Machines - Minimum Information to be Included in Specification Sheets Part 3: Postal Franking Machines - English Version
N-農業,食品
CNS 6506:2018 - 英文版
漁船上分級包裝冷凍蝦類
Frozen Shrimp Graded and Packaged on Board - English Version
O-木業
CNS 457:2018 - 英文版
木材衝擊抗彎強度試驗法
Wood - Determination of impact bending strength - English Version
T-衛生及醫療器材
CNS 17190-4:2018 - 英文版
尿失禁用尿液吸收輔具-聚合物吸收材料特性試驗法-第4部:以加熱質量損失法測定含水量
Urine-absorbing aids for incontinence ? Test methods for characterizing polymer-based absorbent materials ? Part 4: Determination of moisture content by mass loss upon heating - English Version
C-電機工程, 電子工程
CNS 2963:2018 - 英文版
電熱線與電熱帶壽命試驗方法
Method of Test for the Life of Electric Heating Wire and Ribbon - English Version
C-電機工程, 電子工程
CNS 6071:2018 - 英文版
600V矽橡膠絕緣玻璃纖維編織電線
600 V Silicon Rubber Insulated Glass Fiber Braided Wires - English Version

已翻譯
E-軌道工程
CNS 10802:2018 - 英文版
鐵路車輛用單頭與雙頭梯形螺紋(理論值)
Single-Start and Double-Start Trapezoidal Screw Thread with Clearance for Railway Rolling Stock (Theoretical Values) - English Version
K-化學工業
CNS 21003-3:2018 - 英文版
建築物內冷熱水裝置用多層管配管系統-第3部:管件
Multilayer piping systems for hot and cold water installations inside buildings ? Part 3: Fittings - English Version
F-造船工程
CNS 10164:2018 - 英文版
船用小型接線盒(防水型)
Marine Joint Boxes (Watertight Type) - English Version
Z6-物流及包裝
CNS 12993:2018 - 英文版
包裝貨物與單位裝載之固定低頻率振動試驗法
Packaging - Complete, filled transport packages and unit loads - Vibration tests at fixed low frequency - English Version
B-機械工程
CNS 15565-1:2018 - 英文版
機械安全之人因工程設計-第1部:人員全身進入機械內 的開口所需尺度之決定原則
Ergonomic design for the safety of machinery – Part 1: Principles for determining the dimensions required for openings for whole-body access into machinery - English Version
X-資訊及通信
CNS 12645:2018 - 英文版
資訊處理(64位元區塊密碼演繹法之操作模式)
Information Processing-Modes of Operation for a 64-bit Block Cipher Algorithm - English Version

已翻譯
X-資訊及通信
CNS 13663:2018 - 英文版
區域網路及光纖分散式數據介面之實作需求規範
Implementation Requirement Profile for Local Area Networks (LAN) and Fiber Distributed Data Interfaces (FDDI) - English Version
X-資訊及通信
CNS 14484-6:2018 - 英文版
資訊技術-文件及辦公室系統用鍵盤配置-第6部:功能段
Information technology - Keyboard layouts for text and office systems Part6: Function section - English Version
X-資訊及通信
CNS 13853-3:2018 - 英文版
資訊技術–電腦圖形–儲存與轉送圖象描述資訊的元檔–第3部:二進制編碼
Information technology - Computer graphics - Metafile for the storage and transfer of picture description information - Part 3:Binary encoding - English Version

找到:7153條目   |  [首頁]-[上一頁]-[下一頁]-[尾頁]  | 去到: [119] [120] [121] [122] [123] [124] [125]

 

| 首頁 | 常見問題 | 登錄 | 註冊 | 聯繫我們 | English | ©  CNS-standards.org   2001-2025 版權所有
主管機關連結:
經濟部標準檢驗局
本網站非隸屬於經濟部標準檢驗局