"CA " CNS Standards List |
|
CNS 15153
2018 Edition BiologiCAl evaluation of medicaldevices - Part 17 : Establishment of allowable limits for leachable substances 醫療器材生物性評估－第１７部：可溶出物質容忍限量之建立 |
|
|
|
CNS 13705
2018 Edition Integrated Services Digital Network (ISDN) Connected Line IdentifiCAtion Restriction (COLR) Supplementary Service 整體服務數位網路之連接號碼不顯示增添服務 |
|
|
|
CNS 9133
2018 Edition 660V Twin-Core EPR Insulated Lead Sheathed Metal Netting Covered CAble(660V-DPLC) and 660V Twin-core EPR Insulated Lead Sheathed Metal Netting Covered PVC Anti-Corrosion Cable(660V-DPLCY) for Marine Use 船用６６０Ｖ二心ＥＰＲ絕緣鉛皮被覆金屬網鎧裝電纜（６６０Ｖ–ＤＰＬＣ）及６６０Ｖ二心ＥＰＲ絕緣鉛皮被覆金屬網鎧裝ＰＶＣ防蝕電纜（６６０Ｖ–ＤＰＬＣＹ） |
|
|
|
CNS 15006
2018 Edition Flow-metering devices for connection to terminal units of mediCAl gas pipeline systems 連接於醫療氣體管線系統終端單元之流量計裝置 |
|
|
|
CNS 62821-2
2018 Edition Halogen-free, low smoke, thermoplastic insulated and sheathed CAbles of rated voltages up to and including 450/750 V − Part 2: Test methods 額定電壓450/750 V 以下無鹵素低煙量熱塑性絕緣與被覆電纜－第2部：試驗法 |
|
|
|
CNS 9151
2018 Edition 660V, Single-Core, Twin-Core, Three-Core, EPR Insulated PVC Sheathed Metal Netting Covered CAble and 660V, Single-Core, Twin-Core, Three-Core, EPR Insulated PVC Sheathed Metal Netting Covered PVC Anti-Corrosion Cable for Marine Use 船用６６０Ｖ單心、二心、三心ＥＰＲ絕緣ＰＶＣ被覆金屬網鎧裝電纜（附共同遮蔽）及６６０Ｖ單心、二心、三心ＥＰＲ絕緣ＰＶＣ被覆金屬網鎧裝ＰＶＣ防蝕電纜（附共同遮蔽） |
|
|
|
CNS 978
2018 Edition Method of Test for CAnned Food-Inspection for Flavor and Odor 食品罐頭檢驗法–風味之檢查 |
Translated |
|
|
CNS 9691
2018 Edition Information Processing Systems-VoCAbulary ( Part 5 : Representation of Data ) 資訊處理系統–詞彙（第５部：資料之表示方法） |
|
|
|
CNS 15547-1
2018 Edition MechaniCAl vibration and shock - Evaluation of human exposure to whole-body vibration - Part 1: General requirements 機械振動與衝擊－人體曝露於全身振動的評估－第1部：一般要求 |
|
|
|
CNS 14393-1
2018 Edition BiologiCAl evaluation of medical devices – Part 1：Evaluation and testing 醫療器材生物性評估－第一部分：評估與試驗 |
|
|
|
CNS 15145
2018 Edition Preparation of steel substrates before appliCAtion of paints and related products-Surface roughness characteristics of blast-cleaned steel substrates (Method for the grading of surface profile of abrasive blast-cleaned steel-Comparator procedure) 調理肉品 |
|
|
|
CNS 15101
2018 Edition Rubber – General procedures for preparing and conditioning test pieces for physiCAl test methods 橡膠－物理試驗用試片製備及狀態調節之一般程序 |
|
|
|
CNS 16031-1
2018 Edition Outdoor furniture − Seating and tables for CAmping, domestic and contract use − Part 1: General safety requirements 戶外家具－露營、家用及公共場所用桌椅－第1部：一般安全要求 |
|
|
|
CNS 13742-6
2018 Edition Information technology - Message handling systems (MHS) - Part 6:protocol specifiCAtions 資訊技術–訊息處理系統–第６部:協定規格 |
|
|
|
CNS 13524
2018 Edition Standard Representation of Latitude, Longitude and Altitude for Geographic Point LoCAtions 地理點位置之經度緯度及海拔高度之標準表示法 |
|
|
|
CNS 4022
2018 Edition Permissible Deviations in Dimensions Without Tolerance IndiCAtion (Die Castings) 一般許可差（壓鑄） |
|
|
|
CNS 9156
2018 Edition 250V,Single-Core,Twin-Core,Three-Core,EPR Insulated CP Sheathed Metal Netting Covered CAble 250V Single-Core Three-Core EPR Insulated CP Sheathed Metal Netting Covered PVC Anti-Corrosion Cable for Marine Use 船用２５０Ｖ單心、二心、三心ＥＰＲ絕緣ＣＰ被覆金屬網鎧裝電纜（附共同遮蔽）及２５０Ｖ單心、二心、三心ＥＰＲ絕緣ＣＰ被覆金屬網鎧裝ＰＶＣ防蝕電纜（附共同遮蔽） |
|
|
|
CNS 9129
2018 Edition 660V Single-Core EPR Insulated CP Sheathed Metal Netting Covered CAble(660V-SPNC) and 660V Single-Core EPR Insulated CP Sheathed Metal Netting Covered PVC Anti-Corrosion Cable (660-SPNCY) for Marine Use 船用６６０Ｖ單心ＥＰＲ絕緣ＣＰ被覆金屬網鎧裝電纜（６６０Ｖ–ＳＰＮＣ）及６６０Ｖ單心ＥＰＲ絕緣ＣＰ被覆金屬網鎧裝ＰＶＣ防蝕電纜（６６０Ｖ–ＳＰＮＣＹ） |
|
|
|
CNS 8491
2018 Edition Marine Hull CAst Steel Angle Valves 船體用鑄鋼角閥 |
|
|
|
CNS 14545-3
2018 Edition Fire hazard testing-part 1:Guidance for the preparation of requirements and test specifiCAtions for assessing fire hazard of electrotechnical products-Guidance for use of preselection procedures 火災危險性試驗－第１部：制定評估電氣產品之火災危險性需求及試驗內容之指引－預選程序之指引 |
|
|
|
CNS 14393-9
2018 Edition BiologiCAl evaluation of medical devices - Part 9: Framework for identification and quantification of potential degradation products 醫療器材生物性評估－第９部：潛在降解產物之鑑別及定量分析架構 |
|
|
|
CNS 15609-3
2018 Edition Thermoplastics pipes and fittings − ViCAt softening temperature − Part 3: Test conditions for acrylonitrile/butadiene/styrene (ABS) and acrylonitrile/styrene/acrylic ester (ASA) pipes and fittings 熱塑性塑膠管與管件－衛氏軟化溫度－第3部：丙烯腈-丁二烯-苯乙烯及丙烯腈-苯乙烯-丙烯酸酯管與管件之試驗條件 |
|
|
|
CNS 14327-1
2018 Edition Digital subscriber signalling system no.2-Connection modifiCAtion:Peak cell rate modification by the connection owner 第二號數位用戶信號系統－連接修改：由連接擁有者從事之尖峰細胞速率修改 |
|
|
|
CNS 11297
2018 Edition Method of CApping cylindrical concrete specimens 混凝土圓柱試體蓋平法 |
|
|
|
CNS 15660-8
2018 Edition Test conditions for numeriCAlly controlled turning machines and turning centres − Part 8: Evaluation of thermal distortions 數值控制車床及車削中心機之試驗條件－第8 部：熱變形之評估 |
|
|
|
CNS 15043
2018 Edition Standard specifiCAtion for electronic thermometer for intermittent determination of patient temperature 間歇性測定患者體溫之電子式體溫計 |
|
|
|
CNS 14378
2018 Edition Information technology-TelecommuniCAtions and information exchange between systems - Use of X.25 to provide the OSIconnection- Mode network service 資訊技術－系統間電信與資訊交換－使用X．25提供OSI連接模式網路服務 |
|
|
|
CNS 13741-3
2018 Edition Information technology-Open systems interconnection-Virtual terminal basic class-appliCAtion profiles-Part 3:AVT 22-S-mode forms application profile 資訊技術–開放系統互連–虛擬終端機基本類別–應用規範–第３部：同步模式表格應用規範 |
|
|
|
CNS 15456
2018 Edition Methods of measurement on alternating current light emitting diode components for optiCAl and electrical characteristics 交流發光二極體元件之光學及電性量測法 |
|
|
|
CNS 13832
2018 Edition Broadband-integrated services digital networks (B-ISDN) ATM adaptation layer (AAL) specifiCAtion 寬頻整體服務數位網路–非同步傳送模式適應層規格 |
|
| Find out:4406Items | To Page of: First -Previous-Next -Last | [60] [61] [62] [63] [64] [65] [66] |
