CNS Standards Solution | HOME | LOGIN | SIGN UP | CONTACT US | 中文版 |
�� ��

Chinese National Standards
中華民國國家標準
- Taiwan 台灣 -
 

"1, " CNS Standards List

B-Mechanical Engineering
CNS 5961    1993 Edition
General Rules for Inspection of Valves
閥之檢驗總則
C-Electrical Engineering
CNS 13288    1993 Edition
Basic Environmental Testing Procedures Part 2: Tests - Guidance on Change of Temperature Tests
環境試驗法(電氣、電子)-溫度變化試驗之指引
B-Mechanical Engineering
CNS 714    1993 Edition
Cast Iron Flanged Gate Valves ( 5 kgf/㎠) ( Outside Screw Type)
鑄鐵凸緣型閘閥(5 kgf/cm2)(閥桿上升型)
C-Electrical Engineering
CNS 13213    1993 Edition
Procedures for Temperature and Irradiance Corrections to Measured I-V Characteristics of Crystalline Silicon Photovoltaic Devices
對矽晶光電元件之電流電壓特性測量值做溫度與輻射校正之程序
B-Mechanical Engineering
CNS 10847    1993 Edition
Small Size Multi - Stage Centrifugal Pumps
小型多段離心泵
P-Pulp & PaperIndustry
CNS 12887-1    1993 Edition
Method of Test for Accelerated Aging of Paper and Paperboard - Moist Heat Treatment at 80℃ and 65% R.H.
紙及紙板加速老化試驗法-80 ℃及65 %R.H.濕熱處理

Translated
C-Electrical Engineering
CNS 13214    1993 Edition
Basic Environmental Testing Procedures Part 2: Tests – Test Ec: Drop and Topple, Primarily for Equipment - type Specimens
環境試驗法(電氣、電子)-面落下、角落下及翻倒(主要為設備)試驗法
B-Mechanical Engineering
CNS 713    1993 Edition
Cast iron flanged gate valves (10 kgf/㎠) (Inside screw non-rising stem type)
鑄鐵凸緣型閘閥(10 kgf/cm2)(閥桿非上升型)

Translated
B-Mechanical Engineering
CNS 13192    1993 Edition
Test Methods for Performance and Accuracy of Band Saw Stretchers
帶鋸片伸整機之性能試驗及精度檢驗法
P-Pulp & PaperIndustry
CNS 13143    1993 Edition
Method of Test for Internal Bonding Strength Paperboard ( Using Z- direction Tensile / Compression Tester)
紙板內部結合強度試驗法(使用Z-方向拉/壓式試驗機)

Translated
B-Mechanical Engineering
CNS 5973    1993 Edition
Cast Iron Flanged Angle Valves (10kgf/c㎡)
鑄鐵凸緣型角閥(10 kgf/cm2)
A-Civil Engineering & Architecture
CNS 13299    1993 Edition
Method of Test for Trapezoid Tearing Strength of Geotextiles
地工織物撕裂強度試驗法(梯形法)
P-Pulp & PaperIndustry
CNS 12886-1    1993 Edition
Method of Test for Accelerated Aging of Paper and Paperboard - Dry Heat Treatment at 120℃ or 150℃
紙及紙板加速老化試驗法-120 ℃或150 ℃乾熱處理

Translated
B-Mechanical Engineering
CNS 100    1993 Edition
Accuracy Inspection of Table Type Horizontal Boring Machines
床台型臥式搪床精度檢驗

Translated
P-Pulp & PaperIndustry
CNS 13142    1993 Edition
Method of Test for Ink Absorption of Paper ( K & N Ink Absorption Test )
紙張吸墨度試驗法(K&N油墨吸收試驗法)

Translated
C-Electrical Engineering
CNS 13196    1993 Edition
Sampling Rate and Source Encoding for Professional Digital Audio Recording
專業數位聲頻記錄之取樣率與聲源編碼
B-Mechanical Engineering
CNS 13268    1993 Edition
Test Methods for Performance and Accuracy of Moulding Machine
多軸鉋機之性能試驗及精度檢驗法
C-Electrical Engineering
CNS 12518    1993 Edition
Microwave Ovens
微波爐

Translated
C-Electrical Engineering
CNS 3631    1993 Edition
Basic Environmental Testing Procedures Part 2: Tests - Test Q: Sealing
環境試驗法(電氣、電子)-密封性試驗法
C-Electrical Engineering
CNS 13195    1993 Edition
Audio Recording - PCM Encoder/Decoder System
聲頻記錄(脈碼調變之編碼/解碼器系統)
G-Ferrous Materials & Metallurgy
CNS 13216    1993 Edition
Hot - rolled High Strength Steel Sheets with Improved Formability for Automobile Structural Uses
熱軋高強度具成形性汽車結構用鋼片及鋼捲
Z-#N/A
CNS 13165    1993 Edition
Method of Macro Test for Section of Spot Welded Joints
點熔接接合之斷面巨觀試驗法
P-Pulp & PaperIndustry
CNS 12886    1993 Edition
Method of Test for Accelerated Aging of Paper and Paperboard - Dry Heat Treatment at 105℃
紙及紙板加速老化試驗法-105 ℃乾熱處理

Translated
C-Electrical Engineering
CNS 13087    1992 Edition
Reliability Assured Light Emitting Diode Big Lamps (for Outdoor Display)
可靠度保證發光二極體大型燈(戶外顯示用)
Z-#N/A
CNS 12994    1992 Edition
Method of Determination for total Carbon Content of Hardmetals (Gravimetric Method)
超硬合金全碳量測定法(重量法)
C-Electrical Engineering
CNS 13086    1992 Edition
Basic Environmental Testing procedures Part 2: Test Td: Solderability.resistance to dissolution of Metallization and to Soldering Heat of Surface Mounting Devices (SMD)
環境試驗法(電氣、電子)-表面黏著元件之焊錫性,金屬端的耐溶解性及焊錫耐熱性
C-Electrical Engineering
CNS 13090    1992 Edition
Method of Endurance Test for Light Emitting Diode Big Lamps (for Outdoor Display)-Continuouus Applying Current Test
發光二極體大型燈(戶外顯示用)耐久性試驗法-連續通電試驗
Z-#N/A
CNS 13001    1992 Edition
Method of Radiographic Testing for Circumferential Butt Welds of Aluminum Pipes and Tubes
鋁管圓周對頭熔接縫之放射線透射試驗法
Z-#N/A
CNS 12995    1992 Edition
Method of Determination for Insoluble (free) Carbon Content of Hardmetals (Gravimetric Method)
超硬合金游離碳量測定法(重量法)
B-Mechanical Engineering
CNS 6885    1992 Edition
Cast Steel Flanged Swing Check Valves(10 kgf/㎠)
鑄鋼凸緣型擺動式止回閥(10 kgf/cm2)

Translated

Find out:10860Items   |  To Page of: First -Previous-Next -Last  | [324] [325] [326] [327] [328] [329] [330]

 

| HOME | LOGIN | SIGN UP | CONTACT US | 中文版 | ©  CNS-standards.org Copyright  2001-2025 All Rights Reserved
The authority agency link :
Bureau of Standards, Metrology & Inspection M.O.E.A.
This site is not affiliated with or endorsed by the BSMI or MOEA.